All-electrical skyrmionic magnetic tunnel junction.

Topological whirls or 'textures' of spins such as magnetic skyrmions represent the smallest realizable emergent magnetic entities1-5. They hold considerable promise as robust, nanometre-scale, mobile bits for sustainable computing6-8. A longstanding roadblock to unleashing their potential is the absence of a device enabling deterministic electrical readout of individual spin textures9,10. Here we present the wafer-scale realization of a nanoscale chiral magnetic tunnel junction (MTJ) hosting a single, ambient skyrmion. Using a suite of electrical and multimodal imaging techniques, we show that the MTJ nucleates skyrmions of fixed polarity, whose large readout signal-20-70% relative to uniformly magnetized states-corresponds directly to skyrmion size. The MTJ exploits complementary nucleation mechanisms to stabilize distinctly sized skyrmions at zero field, thereby realizing three non-volatile electrical states. Crucially, it can electrically write and delete skyrmions to both uniform states with switching energies 1,000 times lower than the state of the art. Here, the applied voltage emulates a magnetic field and, in contrast to conventional MTJs, it reshapes both the energetics and kinetics of the switching transition, enabling deterministic bidirectional switching. Our stack platform enables large readout and efficient switching, and is compatible with lateral manipulation of skyrmionic bits, providing the much-anticipated backbone for all-electrical skyrmionic device architectures9,10. Its wafer-scale realizability provides a springboard to harness chiral spin textures for multibit memory and unconventional computing8,11.

Multistate Compound Magnetic Tunnel Junction Synapses for Digital Recognition.

The quest to mimic the multistate synapses for bioinspired computing has triggered nascent research that leverages the well-established magnetic tunnel junction (MTJ) technology. Early works on the spin transfer torque MTJ-based artificial neural network (ANN) are susceptible to poor thermal reliability, high latency, and high critical current densities. Meanwhile, work on spin-orbit torque (SOT) MTJ-based ANN mainly utilized domain wall motion, which yields negligibly small readout signals differentiating consecutive states and has designs that are incompatible with technological scale-up. Here, we propose a multistate device concept built upon a compound MTJ consisting of multiple SOT-MTJs (number of MTJs, n = 1-4) on a shared write channel, mimicking the spin-based ANN. The n + 1 resistance states representing varying synaptic weights can be tuned by varying the voltage pulses (±1.5-1.8 V), pulse duration (100-300 ns), and applied in-plane fields (5.5-10.5 mT). A large TMR difference of more than 13.6% is observed between two consecutive states for the 4-cell compound MTJ, a 4-fold improvement from reported state-of-the-art spin-based synaptic devices. The ANN built upon the compound MTJ shows high learning accuracy for digital recognition tasks with incremental states and retraining, achieving test accuracy as high as 95.75% in the 4-cell compound MTJ. These results provide an industry-compatible platform to integrate these multistate SOT-MTJ synapses directly into neuromorphic architecture for in-memory and unconventional computing applications.

Chiral Interlayer Exchange Coupling for Asymmetric Domain Wall Propagation in Field-Free Magnetization Switching.

The discovery of chiral spin texture has unveiled many unusual yet extraordinary physical phenomena, such as the Néel type domain walls and magnetic skyrmions. A recent theoretical study suggests that a chiral exchange interaction is not limited to a single ferromagnetic layer; instead, three-dimensional spin textures can arise from an interlayer Dzyaloshinskii-Moriya interaction. However, the influence of chiral interlayer exchange coupling on the electrical manipulation of magnetization has rarely been addressed. Here, the coexistence of both symmetric and chiral interlayer exchange coupling between two orthogonally magnetized CoFeB layers in PtMn/CoFeB/W/CoFeB/MgO is demonstrated. Images from polar magneto-optical Kerr effect microscopy indicate that the two types of coupling act concurrently to induce asymmetric domain wall propagation, where the velocities of domain walls with opposite chiralities are substantially different. Based on this microscopic mechanism, field-free switching of the perpendicularly magnetized CoFeB is achieved with a wide range of W thicknesses of 0.6-4.5 nm. This work enriches the understanding of interlayer exchange coupling for spintronic applications.

Current-induced self-switching of perpendicular magnetization in CoPt single layer.

All-electric switching of perpendicular magnetization is a prerequisite for the integration of fast, high-density, and low-power magnetic memories and magnetic logic devices into electric circuits. To date, the field-free spin-orbit torque (SOT) switching of perpendicular magnetization has been observed in SOT bilayer and trilayer systems through various asymmetric designs, which mainly aim to break the mirror symmetry. Here, we report that the perpendicular magnetization of CoxPt100-x single layers within a special composition range (20 < x < 56) can be deterministically switched by electrical current in the absence of external magnetic field. Specifically, the Co30Pt70 shows the largest out-of-plane effective field efficiency and best switching performance. We demonstrate that this unique property arises from the cooperation of two structural mechanisms: the low crystal symmetry property at the Co platelet/Pt interfaces and the composition gradient along the thickness direction. Compared with that in bilayers or trilayers, the field-free switching in CoxPt100-x single layer greatly simplifies the SOT structure and avoids additional asymmetric designs.

Rashba-Edelstein Effect in the h-BN Van Der Waals Interface for Magnetization Switching.

Van der Waals materials are attracting great attention in the field of spintronics due to their novel physical properties. For example, they are utilized as spin-current generating materials in spin-orbit torque (SOT) devices, which offers an electrical way to control the magnetic state and is promising for future low-power electronics. However, SOTs have mostly been demonstrated in vdW materials with strong spin-orbit coupling (SOC). Here, the observation of a current-induced SOT in the h-BN/SrRuO3 bilayer structure is reported, where the vdW material (h-BN) is an insulator with negligible SOC. Importantly, this SOT is strong enough to induce the switching of the perpendicular magnetization in SrRuO3 . First-principles calculations suggest a giant Rashba effect at the interface between vdW material and SrRuO3 (110)pc thin film, which leads to the observed SOT based on a simplified tight-binding model. Furthermore, it is demonstrated that the current-induced magnetization switching can be modulated by the electric field. This study paves the way for exploring the current-induced SOT and magnetization switching by integrating vdW materials with ferromagnets.

Spin-Orbit Torque-Induced Domain Nucleation for Neuromorphic Computing.

Neuromorphic computing has become an increasingly popular approach for artificial intelligence because it can perform cognitive tasks more efficiently than conventional computers. However, it remains challenging to develop dedicated hardware for artificial neural networks. Here, a simple bilayer spintronic device for hardware implementation of neuromorphic computing is demonstrated. In L11 -CuPt/CoPt bilayer, current-inducted field-free magnetization switching by symmetry-dependent spin-orbit torques shows a unique domain nucleation-dominated magnetization reversal, which is not accessible in conventional bilayers. Gradual domain nucleation creates multiple intermediate magnetization states which form the basis of a sigmoidal neuron. Using the L11 -CuPt/CoPt bilayer as a sigmoidal neuron, the training of a deep learning network to recognize written digits, with a high recognition rate (87.5%) comparable to simulation (87.8%) is further demonstrated. This work offers a new scheme of implementing artificial neural networks by magnetic domain nucleation.

Modulation of Spin-Orbit Torque from SrRuO3 by Epitaxial-Strain-Induced Octahedral Rotation.

Spin-orbit torque (SOT), which arises from the spin-orbit coupling of conduction electrons, is believed to be the key route for developing low-power, high-speed, and nonvolatile memory devices. Despite the theoretical prediction of pronounced Berry phase curvatures in certain transition-metal perovskite oxides, which lead to considerable intrinsic spin Hall conductivity, SOT from this class of materials has rarely been reported until recently. Here, the SOT generated by epitaxial SrRuO3 of three different crystal structures is systematically studied. The results of both spin-torque ferromagnetic resonance and in-plane harmonic Hall voltage measurements concurrently reveal that the intrinsic SOT efficiency of SrRuO3 decreases when the epitaxial strain changes from tensile to compressive. The X-ray diffraction data demonstrate a strong correlation between the magnitude of SOT and octahedral rotation around the in-plane axes of SrRuO3 , consistent with the theoretical prediction. This work offers new possibilities of tuning SOT with crystal structures and novel opportunities of integrating the unique properties of perovskite oxides with spintronic functionalities.

Symmetry-dependent field-free switching of perpendicular magnetization.

Modern magnetic-memory technology requires all-electric control of perpendicular magnetization with low energy consumption. While spin-orbit torque (SOT) in heavy metal/ferromagnet (HM/FM) heterostructures1-5 holds promise for applications in magnetic random access memory, until today, it has been limited to the in-plane direction. Such in-plane torque can switch perpendicular magnetization only deterministically with the help of additional symmetry breaking, for example, through the application of an external magnetic field2,4, an interlayer/exchange coupling6-9 or an asymmetric design10-14. Instead, an out-of-plane SOT15 could directly switch perpendicular magnetization. Here we observe an out-of-plane SOT in an HM/FM bilayer of L11-ordered CuPt/CoPt and demonstrate field-free switching of the perpendicular magnetization of the CoPt layer. The low-symmetry point group (3m1) at the CuPt/CoPt interface gives rise to this spin torque, hereinafter referred to as 3m torque, which strongly depends on the relative orientation of the current flow and the crystal symmetry. We observe a three-fold angular dependence in both the field-free switching and the current-induced out-of-plane effective field. Because of the intrinsic nature of the 3m torque, the field-free switching in CuPt/CoPt shows good endurance in cycling experiments. Experiments involving a wide variety of SOT bilayers with low-symmetry point groups16,17 at the interface may reveal further unconventional spin torques in the future.

Perpendicular Magnetic Anisotropy and Dzyaloshinskii-Moriya Interaction at an Oxide/Ferromagnetic Metal Interface.

We report on the study of both perpendicular magnetic anisotropy (PMA) and Dzyaloshinskii-Moriya interaction (DMI) at an oxide/ferromagnetic metal (FM) interface, i.e., BaTiO_{3} (BTO)/CoFeB. Thanks to the functional properties of the BTO film and the capability to precisely control its growth, we are able to distinguish the dominant role of the oxide termination (TiO_{2} vs BaO) from the moderate effect of ferroelectric polarization in the BTO film, on the PMA and DMI at an oxide/FM interface. We find that the interfacial magnetic anisotropy energy of the BaO-BTO/CoFeB structure is 2 times larger than that of the TiO_{2}-BTO/CoFeB, while the DMI of the TiO_{2}-BTO/CoFeB interface is larger. We explain the observed phenomena by first principles calculations, which ascribe them to the different electronic states around the Fermi level at oxide/ferromagnetic metal interfaces and the different spin-flip process. This study paves the way for further investigation of the PMA and DMI at various oxide/FM structures and thus their applications in the promising field of energy-efficient devices.

Continuously controllable photoconductance in freestanding BiFeO3 by the macroscopic flexoelectric effect.

Flexoelectricity induced by the strain gradient is attracting much attention due to its potential applications in electronic devices. Here, by combining a tunable flexoelectric effect and the ferroelectric photovoltaic effect, we demonstrate the continuous tunability of photoconductance in BiFeO3 films. The BiFeO3 film epitaxially grown on SrTiO3 is transferred to a flexible substrate by dissolving a sacrificing layer. The tunable flexoelectricity is achieved by bending the flexible substrate which induces a nonuniform lattice distortion in BiFeO3 and thus influences the inversion asymmetry of the film. Multilevel conductance is thus realized through the coupling between flexoelectric and ferroelectric photovoltaic effect in freestanding BiFeO3. The strain gradient induced multilevel photoconductance shows very good reproducibility by bending the flexible BiFeO3 device. This control strategy offers an alternative degree of freedom to tailor the physical properties of flexible devices and thus provides a compelling toolbox for flexible materials in a wide range of applications.

Free Field Electric Switching of Perpendicularly Magnetized Thin Film by Spin Current Gradient.

To realize high-speed nonvolatile magnetic memory with low energy consumption, electric switching of perpendicular magnetization by spin-orbit torque in the heavy metal/ferromagnetic (HM/FM) structure has recently attracted intensive attention. Conventionally, an external in-plane magnetic field for breaking the symmetry is required for achieving electric switching of perpendicular magnetization. However, electric switching without external field is the prerequisite for the integration of magnetic functionality into the integrated circuit devices. Here, we propose a new method of utilizing a W wedge in the Pt/W/FM structure to induce a spin current gradient, which can result in an in-plane equivalent field along the wedge thickness gradient direction. We experimentally demonstrate the deterministic magnetization switching of perpendicular Co/Ni multilayers without external magnetic field when the electric current is along the wedge thickness gradient direction. Our findings shed light on free field electric switching of magnetization by a new physical parameter-an asymmetric spin current induced by a bilayer wedge structure.

Large spin-orbit torque efficiency enhanced by magnetic structure of collinear antiferromagnet IrMn.

Spin-orbit torque (SOT) offers promising approaches to developing energy-efficient memory devices by electric switching of magnetization. Compared to other SOT materials, metallic antiferromagnet (AFM) potentially allows the control of SOT through its magnetic structure. Here, combining the results from neutron diffraction and spin-torque ferromagnetic resonance experiments, we show that the magnetic structure of epitaxially grown L10-IrMn (a collinear AFM) is distinct from the widely presumed bulk one. It consists of twin domains, with the spin axes orienting toward [111] and [-111], respectively. This unconventional magnetic structure is responsible for much larger SOT efficiencies up to 0.60 ± 0.04, compared to 0.083 ± 0.002 for the polycrystalline IrMn. Furthermore, we reveal that this magnetic structure induces a large isotropic bulk contribution and a comparable anisotropic interfacial contribution to the SOT efficiency. Our findings shed light on the critical roles of bulk and interfacial antiferromagnetism to SOT generated by metallic AFM.

Giant Enhancements of Perpendicular Magnetic Anisotropy and Spin-Orbit Torque by a MoS2 Layer.

2D transition metal dichalcogenides have attracted much attention in the field of spintronics due to their rich spin-dependent properties. The promise of highly compact and low-energy-consumption spin-orbit torque (SOT) devices motivates the search for structures and materials that can satisfy the requirements of giant perpendicular magnetic anisotropy (PMA) and large SOT simultaneously in SOT-based magnetic memory. Here, it is demonstrated that PMA and SOT in a heavy metal/transition metal ferromagnet structure, Pt/[Co/Ni]2 , can be greatly enhanced by introducing a molybdenum disulfide (MoS2 ) underlayer. According to first-principles calculation and X-ray absorption spectroscopy (XAS), the enhancement of the PMA is ascribed to the modification of the orbital hybridization at the interface of Pt/Co due to MoS2 . The enhancement of SOT by the role played by MoS2 is explained, which is strongly supported by the identical behavior of SOT and PMA as a function of Pt thickness. This work provides new possibilities to integrate 2D materials into promising spintronics devices.

Fast Charging Lithium Batteries: Recent Progress and Future Prospects.

Fast charging enables electronic devices to be charged in a very short time, which is essential for next-generation energy storage systems. However, the increase of safety risks and low coulombic efficiency resulting from fast charging severely hamper the practical applications of this technology. This Review summarizes the challenges and recent progress of lithium batteries for fast charging. First, it describes the definition of fast charging and proposes a critical value of ionic and electrical conductivity of electrodes for fast charging in a working battery. Then based on this definition, the requirements and optimization strategies of the electrode, electrolyte, and electrode/electrolyte interface for fast charging are proposed. Finally, a general conclusion and perspectives on the better understanding of lithium batteries with fast charging capability are presented.

Control of Synaptic Plasticity Learning of Ferroelectric Tunnel Memristor by Nanoscale Interface Engineering.

Brain-inspired computing is an emerging field, which intends to extend the capabilities of information technology beyond digital logic. The progress of the field relies on artificial synaptic devices as the building block for brainlike computing systems. Here, we report an electronic synapse based on a ferroelectric tunnel memristor, where its synaptic plasticity learning property can be controlled by nanoscale interface engineering. The effect of the interface engineering on the device performance was studied. Different memristor interfaces lead to an opposite virgin resistance state of the devices. More importantly, nanoscale interface engineering could tune the intrinsic band alignment of the ferroelectric/metal-semiconductor heterostructure over a large range of 1.28 eV, which eventually results in different memristive and spike-timing-dependent plasticity (STDP) properties of the devices. Bidirectional and unidirectional gradual resistance modulation of the devices could therefore be controlled by tuning the band alignment. This study gives useful insights on tuning device functionalities through nanoscale interface engineering. The diverse STDP forms of the memristors with different interfaces may play different specific roles in various spike neural networks.

Effect of Extrinsically Introduced Passive Interface Layer on the Performance of Ferroelectric Tunnel Junctions.

We report the effect of the top electrode/functional layer interface on the performance of ferroelectric tunnel junctions. Ex situ and in situ fabrication process were used to fabricate the top Pt electrode. With the ex situ fabrication process, one passive layer at the top interface would be induced. Our experimental results show that the passive interface layer of the ex situ devices increases the coercive voltage of the functional BaTiO3 layer and decreases the tunneling current magnitude. However, the ex situ tunneling devices possess more than 1000 times larger ON/OFF ratios than that of the in situ devices with the same size of top electrode.